A Hyundai Veloster vehicle inspection identified several mechanical, electrical and general condition issues that a potential buyer would want to know about before purchasing the vehicle.

CMM Automotive inspected the Veloster’s interior, engine bay, cooling system, steering, brakes, tyres, body and electrical components. We also carried out a road test to assess how the vehicle operated.

The inspection revealed several areas requiring attention, including a poor battery, signs of coolant leakage, a leaking power steering pump, worn front tyres and low front brakes.

Hyundai Veloster Interior Condition

The vehicle’s interior showed several signs of wear.

The right-hand front carpet was worn and stained. We also found stains on other carpet areas and the roof lining.

Although these are primarily cosmetic issues, interior condition can provide useful information when assessing how a used vehicle has been maintained.

We also identified two functional problems inside the vehicle.

The rear door keyless entry wasn’t working correctly, while a rear seatbelt would stick when retracting.

A seatbelt that doesn’t operate smoothly deserves attention because seatbelts form an important part of the vehicle’s safety system.

Poor Battery Test Result

Testing in the engine bay found that the battery tested poorly.

A weak battery may continue starting a vehicle for some time before eventually failing. Battery condition can also affect various electrical systems, particularly when available voltage becomes low.

Knowing that the battery tested poorly gives a potential buyer the opportunity to allow for replacement or further testing.

Signs of Cooling System Problems

The cooling system presented several findings worth investigating.

The radiator cap appeared swollen, and we found minor water or coolant staining around the upper and lower radiator hoses.

There were also signs of staining around the thermostat area.

Coolant staining can indicate that coolant has escaped from the cooling system at some stage. However, further testing may be required to determine whether an active leak is currently present and identify its exact source.

Cooling-system problems shouldn’t be ignored because maintaining the correct engine operating temperature is important for reliability.

Power Steering Pump Leak

Inspection of the engine bay also identified a leaking power steering pump.

A power steering fluid leak can gradually reduce the fluid level and may eventually affect steering assistance.

The location and severity of a leak should be assessed before deciding what repairs are required.

Finding the leak during a pre-purchase inspection allows the buyer to consider the potential repair before committing to the vehicle.

Front Tyres and Brakes

The front tyres showed significant wear and required attention.

We also estimated that the front brakes had approximately 20% remaining.

This means the buyer would need to consider front brake replacement in the relatively near future, depending on vehicle use and further assessment.

Brakes and tyres are normal wear items, but replacing several components shortly after purchasing a vehicle can add considerably to the overall cost.

Rear Brakes and Spare Tyre

The rear brakes also showed wear.

The spare tyre had low remaining tread and would need attention.

A spare tyre is easy to overlook when buying a used vehicle because it isn’t normally visible during a quick inspection.

However, discovering a worn spare tyre during a roadside tyre problem isn’t ideal. Checking it during a vehicle inspection gives the buyer the opportunity to address the issue beforehand.

Lights, Locks and Body Condition

Several additional problems appeared during the exterior inspection.

The headlight lens showed discolouration, and the right-hand park light wasn’t operating.

We also found that the front door lock wasn’t working correctly.

The body panels had minor dents and scratches, while the bumper showed minor paint damage.

These cosmetic findings may not affect the mechanical operation of the vehicle, but documenting them helps provide a more complete picture of its condition.

Cruise Control Not Working

During the road test, we discovered that the cruise control wasn’t operating.

Several different faults can prevent cruise control from working correctly, so further diagnosis would be required to determine the exact cause.

The important point for the potential buyer was knowing about the problem before purchasing the vehicle.

Without a proper road test, this type of fault could easily go unnoticed.

Why a Pre-Purchase Inspection Can Save Surprises

This Hyundai Veloster demonstrates why inspecting a used vehicle involves much more than checking whether the engine starts and the car looks presentable.

The inspection identified a poor battery, cooling-system concerns, a leaking power steering pump, worn tyres, low brakes and several electrical and cosmetic problems.

None of these findings should automatically determine whether someone buys the vehicle.

Instead, they give the buyer useful information about its condition and potential future repair costs.

CMM Automotive provides mobile pre-purchase vehicle inspections in Perth to help buyers better understand the condition of used vehicles before making a purchase.

Our mobile inspection service allows us to assess vehicles at suitable private residences, dealerships and other locations throughout Perth.

Hyundai Veloster Pre-Purchase Inspection

A used Hyundai Veloster may appear to drive reasonably well during a short test drive while still having problems that aren’t immediately obvious.

Checking the vehicle systematically can reveal maintenance requirements, leaks, electrical problems and safety-related concerns.

The buyer can then consider those findings alongside the asking price and overall condition of the vehicle.

If you’re considering buying a used vehicle, contact CMM Automotive on 1800 888 990 to arrange a mobile pre-purchase vehicle inspection.